Expert Answers about Holiday Rambler Ambassador

• Steering Stabilizer for a 2004 Holiday Rambler Ambassador 36PST
• It looks like your 2004 Holiday Rambler Ambassador 36PST was built on a Roadmaster chassis. if the chassis is the Air Ride or Monaco model (except with Dana Spicer front axle) you would need to use steering stabilizer # RM-RBK6-RSSA. If it is a model with a straight axle with leaf spring suspension use # RM-RBK8-RSSA. You can verify the chassis by providing the VIN number to Holliday Rambler.
  view full answer...


• AxleTek Brake Assembly Recommendation for 8k Axles with 4 Bolt Mounting Pattern
• Actually our etrailer.com brand brake assemblies are rebranded AxleTek assemblies. So we have the 8k left and right assembly set # AKEBRK-8 which is most likely what you need but these are 12-1/4 inch in diameter by 3-3/8 inches wide and attach with a 4 bolt pattern.
  view full answer...


• Location of Brake Controller Installation Port on 2006 Holiday Rambler Ambassador
• The best way to confirm the presence and location of a brake controller installation port in your 2006 Holiday Rambler Ambassador is to provide the coach's VIN to the manufacturer so that they can confirm which model year of base chassis was used to build it and where the port is located. A 2006 RV could have been built on either a 2005 or 2006 chassis so it is best to confirm. On some Holiday Ramblers the wiring port for a trailer brake controller can be found under the left side control...
  view full answer...